EQ Cheatsheet | How To Use Instrument Frequency Chart

Learning to read and use an instrument frequency chart is super important if you want to use EQ controls to mix and master music. This EQ cheat sheet will get you up to speed on where various instruments lie on the frequency spectrum and might clash in the mix.

In this post, I am going to walk you through the frequency spectrum, instrument ranges, and EQ tips that will help you master arranging and mixing for different instruments.

Instrument Frequency Chart – EQ Cheat Sheet for Mixing

I’ve made a fantastic EQ cheatsheet for you to use while mixing or fitting frequencies on a mix. You can also download the chart by clicking on the image and printing one to stick on your wall. Having the instrument frequency chart in front of you can be very handy when trying to think about which instrument fits where.

That said, all instruments are unique- the timbre, tone, and even frequencies produced can vary depending on the context. Trying to use a violin for a fast piece with super high harmonics is a terrible idea as getting the intonation of high harmonics can be a pain for the violinist. I would suggest using pitch shift pedals with guitars for this purpose.

While knowing stuff like the significance of tone hole lattice cutoff frequencies on clarinet sounds and ultrasonic limits of instruments beyond 20KHz can be a good way to nerd up, details like those aren’t really required in mixing. You just need to listen to sounds and make sense of it.

Ultimately, you will want to use this EQ cheatsheet as a handy reference and not something to depend on. Your ear is always the best thing to use to discern whether a mix is good, and that comes with ear training and lots of practice.
eq cheatsheet - instrument frequency chart for mixing

Choice Of Instruments

While many musicians think mixing engineers can touch up tracks and fix mistakes in processing, leaving EQ to do all the work is a terrible idea. If your track is full of instruments that are taking up the same frequency range, EQ won’t fix anything.

Most musicians who write songs will think about the instruments before actually recording, and this allows them to think about what instruments will fulfill the role of bass and what to use for the high notes. Personally, I like to write songs on a single instrument (often guitar), then record the parts with different instruments.

I have mentioned that instruments with the same range can clash- you may have been confused by that, so I want to address that here. Think of this scenario- you are playing the guitar and your friend is also playing the guitar, and both of you are playing rhythm.

You have got two options- you could either double the harmony by playing the same thing on two guitars which gives a much fuller sounding rhythm section in the mix, or you could try playing in different frequency ranges. While you are playing the chord changes in the first position, you could have your friend play the same chords somewhere high up the neck.

This is an easy trick to introduce some variation into the rhythm section. Also, voicing chords as spread triads can also be a great way to create some space and break the clunkiness. This is very easy to do in piano and fretted instruments, and if you think the frequencies would sound better spaced out, this is a good way to achieve that.

EQ cheatsheet handy tool for mixing

If you like using Electronic instruments, things can get tricky as those instruments have the highest frequency range. Pipe organ and piano have the next highest frequency ranges overall. If you want to have high pitches, something like a piccolo or flute would be great in the woodwind family.

How To Use EQ and Instrument Frequency Chart

EQ Sweeps

Sweeping the mix for EQ is one of the classic ways to remove any unwanted frequencies.

The process is fairly simple, you start with a point with high gain and narrow bandwidth, resume the track, then sweep that very point across the spectrum till you can pinpoint the problem. There are usually spots in a mix where the issues are easily noticeable, you will want to make cuts on that particular frequency.

using instrument frequency chart and panning EQ

I like to stick to just one area at a time- if you go around adjusting levels for different areas at once, you will end up with a messy mix that sounds terrible.

Practice Narrow Cuts and Wide Boosts

When you’ve pinpointed a problem area, you should then cut the specific frequency. Doing this is going to remove information from the mix, so you should do cuts sparingly.

Usually, 3dB bandwidth is okay, and anything more than that can have drastic effects.

Going with a wider EQ boost will help your edits feel more organic to the ear- a narrow EQ doesn’t sound natural at all. Personally, I like boosting the harmonics slightly for a brighter sound. Many artists like using plugins to analyze spectrum- looking into EQ plugins is a great idea as that can save you lots of time while mixing.

Use Filters

Most modern EQs will let you apply high pass and low pass filters to your signals.

If you are new to digital signals, you should know that even if you are just playing a single note. you will also get a faint trace of overtones in the recording. For example, if you were playing a C note, you would get overtones of G as well. Higher fundamentals come with lower frequencies as well, so it is a good idea to get rid of the unwanted frequencies by applying filters.

high pass and low pass filters for EQ - instrument frequency chart in mixing

High pass filters can remove annoying sounds like rim shots or ringing from hi-hats, and you should also remove low-ends that could be clashing with the guitar parts.

It can be tempting to go overboard, but you should use discretion when using high pass or low pass filters as overdoing it could get rid of important sounds.

Panning to Avoid Clutter

If you feel like instruments are competing for space, you can also pan the sounds to the left or right thus freeing up space. This helps with a better projection of the sound of the instrument and listeners will have an easier time listening to the composition.

You might want to stick with the soloed sounds and think the mix is great but you should listen to the whole mix before deciding if the edit was good.

Final Thoughts

While mixing, knowing the frequency spectrum of certain instruments can make your life easier. It helps avoid clashing frequencies and makes for more polished-sounding mixes.

Feel free to download the EQ cheatsheet I’ve provided above and print that out for use in your own sessions. It’s also a good idea to think about the instrument frequency ranges before recording parts with them- this way, you don’t need to touch up things in the processing as much.

Frequency charts have also been used to assess lower urinary functions– that’s pretty cool!

Frequently Asked Questions

What frequencies should I EQ out?

Usually, you will want to EQ out any outliers like too high frequencies or too low frequencies- a wide cut of 3dB between 250-350Hz is a good idea to get rid of any unwanted sounds in a home mix.

How do you EQ a tuba?

Tuba has a low sound that can make the mix sound fuller. I like to give it a bass boost at about  80Hz for a warm tone.

Similar Posts